Posted on: Aug 05, 2012
13,692 reads







MTM Power Boosts the Audi A6 3.0 BiTDI


The German tuners are back with another project based on the twin-turbo diesel A6.
MTM has been busy preparing aftermarket programs for the KTM X-Bow and the McLaren MP4-12C, however it was only a matter of time until the Bavarians got back to what they do best - creating powerful and stylish Audis. Their latest project is based on the 3.0-liter biturbo diesel-powered Audi A6. Two power levels are being offered by MTM for the 3.0 BiTDI, the first featuring an ECU revamp and stoking the engine's output up from 309 horsepower and 480lb-ft of torque to 365 and 560, respectively.

Share This Story
These Are the Beautiful Girls of the 2014 ... Can a Semi-Truck Jump Over a Speeding Lotu... Chinese Cup Grand Prix Macau Grinds to a H...
The first stage prices at €1,700 and for an additional €100, MTM says a further reprogramming of the ECU tweaks output up to 381hp and 575lb-ft. MTM has also made available two sets of aftermarket brakes to handle all of that added power. Smaller 380x34mm brake discs with 8-piston calipers will set you back €4,900 while bigger 405x26mm discs cost €6,400 and require wheels of at least 20-inches. The Germans offer alloys from 18- to 20-inches, each available for an additional fee. For those Audi owners who crave even more customization, MTM is offering an F-Cantronic ECU for the sporty hatch's air suspension system.
The system commands a further €1,740 and allows the front-end to be lowered by as much as 25mm and 20mm at the back. Check out the MTM power boost for the torque-happy Audi A6 3.0 BiTDI in the photos below.

Reddit



Related cars:
X

Show Your Support. Become a FAN!